equipment list

1. Mark 176 ton press w/ COE servo feed & power straightener.
   10,000 Ibs. Reel.
   Material to .250"x18" wide.
   Stroke - 5", Die height - 14.2", slide adjustment - 4", Bolster - 49.2"x 29.9"x 6.5".
   Ram - 28.3"x 22.8".
2. Stamtec 176 to press w/PRE servo feed, power straightened & power decoil reel.
   Material to .250"x 18" wide.
   Stroke - 8", Die height - 17.72", Slide adjustment - 4", Bolster - 49.2"x 31.5"x 6"
   Ram - 27.5"x 21.6".
3. Bliss 60 ton press w/ PRE servo feed 1/8" x 14" w/loop control, straightener 1/8"x 14".
   600 Ib. Decoil reel
   Material to .130"x 12" wide.
   Stroke - 4", Die height - 12", Slide adjustment - 3", Bolster - 32"x 22"x 3"
   Ram - 17"x 12"
4. Stamtec 60 ton press w/PRE servo feed w/loop control, Strightener - 1/8"x 6"
   2500 Ib decoil reel.
   Material to .125"x 6"
   Stroke - 5", Die height - 11.3", Slide adjustment - 3", Bolster - 35"x 20"x 4"
   Ram - 20"x 14".
   
5. Verson - 65 ton 10' bed universal tooling punch press
6. Niagara - 100 ton 10' bed universal tooling punch press
7. Aida - 45 ton press w/roll feed, power straightener and decoil reel.
   Material to .062"x 6"
   Stroke - 2", Die height - 10", Slide adjustment - 2 ", Bolster - 32"x 14"x 4"
   Ram - 16"x 13"
8. Rouselle - 35 ton gap frame press.
9. Niagara - 35 ton press w/11ga. x 12" feeder and power straightener.
10. Chicago Dries & Krump - 90 ton press brake w/10' bed.
11. Pacific press brake - 250 ton w/ 14' bed.
12. HTC - 300 ton press brake w/16' bed.
13. HTC shear - w/16' blade @ 1/4".
14. Wysong shear w/ 10' blade @ 1/4"
15. Hydmech Horizontal Band saw - 18" x 24" Vise cap.
16. H.E.M. Horizontal Band saw - 20" x 24" Vise cap.
17. Mazak Laser cutter - 10' x 5' 1500 watt. 1/2" material capacity.
18. Decoil line - cut to length line w/ COE 20,000 Ibs power reel, Automatic threader, Straightener and servo feed.
    Material to .130" x 24".
    

There is a complete tool and die machine on the premises with wire E.D.M. capabilities.